Wood Chucking
To calculate the amount of wood that is chucked, and the other
properties of wood chucking, using the TECHNO CNC WOOD LATHE the following
values and assumptions will be used:
- The spindle speed of the lathe has a range of 500-2000 RPM
- The diameter of the chuck is 6 in. approximately 15 cm.
- A one kilogram block of wood made out of American Spruce with a density
of .541 grams per cubic centimeter has approximate dimensions of 12x12x12
cm.
- An attachment is used to feed wood blocks at a rate equal to the rate
of the chuck spinning (1 Block Per Revolution).
- The lathe is run for 1 minute.
At 500 revolutions per minute:
At 2000 revolutions per minute: